This display unit uses the vibration damping control function of the XSEL controller to show you a visual comparison of the condition of vibration in normal movement and where vibration is suppressed by vibration damping control.
This function suppresses vibration of the actuator as well as vibration of the work part installed on the actuator.
Without vibration damping control, vibration increases and therefore the actuator must spend extra time to wait until the vibration stops.
With the vibration damping control function, the end of the work part is almost still because vibration is suppressed. This results in a shorter wait time and cycle time.
This function is also effective in situations when the mechanical rigidity of the system must be increased to suppress vibration.
Note that this function can suppress vibration in a frequency range of 0.5 Hz to 30 Hz.