Category Archives: New IAI Literature

Mini ROBO Cylinder® Cleanroom Dust/Splash-proof

The newly developed motor allows for a far more compact size, comparable in size to an air cylinder. Models are available with the same shape as a typical air cylinder. This ROBO Cylinder can be used in applications where limited space previously required air cylinders.

Cleanroom, dust-proof and splash-proof models have been added to 5 types, with 3 sizes of each type, for a total of 15 models.

 
Learn more and download the catalog.

Rotating Joint Wrist Unit WU Series

Ideal for reducing the cost of equipment

Diagonal approaches and tip swiveling, possible until now only with vertically articulated robots, can now be performed with the minimum required axis configuration.
Ideal for reducing the cost of equipment.

 
Learn more and download the catalog.

New Thin Gripper Series RCP6-GRT7

Equipped with a Battery-less Absolute Encoder as Standard

With orthogonal axis + gripper pick and place, all axes can be configured with battery-less absolute encoder equipped products.
Home return is no longer required when restarting the equipment; you can move to the next operation while gripping the workpiece.

Flat Shape with Height of 39 mm

The height has been reduced by as much 55% when compared a conventional gripper.

High Rigidity

By adopting an integrated body frame guide with proven performance for linear axes, the gripping point distance and overhang amount have been improved greatly.

High Grip Force

IAI presents our highest-class grip force of up to 300N. (Current limit value 70%)

 
Learn more and download the catalog.

New EC ELECYLINDER Series

Simple Operation without Programming

You can quickly setup movement just by entering data. You can also operate it with ON / OFF signals, like a solenoid valve.
No time-consuming programming is necessary.

 

Easily Register the Start and End Points at Any Position

 

Easily Adjust AVD Settings Individually


With the ELECYLINDER, AVD can be entered individually in percentages to apply adjustments.

 

Easily Reduce Cycle Time

Air cylinders cannot operate at high velocity due to the impact at stroke ends which occurs when excess velocity is applied.
The ELECYLINDER can start and stop smoothly at high velocity, reducing cycle time.

 

Easily Reduce Electricity Bills

The difference in the rate of power consumption for the ELECYLINDER and air cylinders depends on the operational frequency. The higher the operational frequency, the more effective the energy-saving becomes.
Based on tests conducted by IAI, the ELECYLINDER’s power consumption under the following conditions is 1/6 that of air cylinders.

 

Learn More about the NEW ELECYLINDER.