IAI America Newsfeed » News

DXF Converter Tutorial Video

IAI America — Fri, 25 Jun 2010 23:13:12 +0000

The X-SEL DXF converter translates CAD data into robot position coordinates. Users can import position data directly from drawings into the X-SEL point tables. Example applications are pick & place and dispensing. Watch the DXF Converter tutorial video to see how it’s done.

The 7 Benefits of ROBO Cylinder®

IAI America — Fri, 25 Jun 2010 00:40:58 +0000

IAI America’s ROBO Cylinders are much more energy efficient and last much longer than the pneumatic cylinders still in use today. But there are even more benefits you’d better know about.

1. Multiple Positioning
2. Push and Hold function
3. Acceleration and Deceleration settings
4. Zone Output Signal
5. Pause Input
6. Incremental Movement
7. Speed Change During Movement

Please watch the 7 Benefits of ROBO Cylinder video to learn all about it.

Introduction to X-SEL PC Software Video Tutorial

IAI America — Tue, 22 Jun 2010 19:23:25 +0000

A new 15 minute X-SEL PC Software video tutorial is now available. The XSEL PC software is fully programmable and can perform many of the same functions as a small PLC.

Please view the X-SEL PC Software video tutorial to learn more.

Pneumatic to ROBO Cylinder Video on MachineDesign

IAI Quality — Thu, 27 May 2010 17:36:56 +0000

Lee Teshler, the editor of MachineDesign interviews IAI’s Chris Prior:

In this interview, Chris Prior discusses the advantage of replacing pneumatic linear actuators with electromechanical systems.

Click on Chris to watch the video.

IAI Application Demo Videos on YouTube

IAI Quality — Wed, 26 May 2010 23:12:15 +0000

Please visit our YouTube page for our latest video uploads.

IAI YouTube Page

Visit IAI America at the ATX South 2010 Expo

IAI America — Wed, 07 Apr 2010 22:43:13 +0000

Please join IAI America at the ATX South Expo on April 28-29, 2010 at the Charlotte Convention Center in Charlotte, NC.

Simply click the coupon to visit the show web site where you will find detailed information and easy online registration for complimentary expo hall admission – a $45 savings!

Don’t forget to ask about our Green Automation ROBO Cylinder lineup!

We look forward to seeing you at booth 1915!

Motor Differences Between Stepper and Servo TIPS-100080

IAI Quality — Mon, 29 Mar 2010 21:26:17 +0000

Motor Characteristic Difference Between Stepper Motor and Servo Motor

Please note the following motor characteristic difference between stepper and servo motors:

With the recent introduction of the Mini ROBO Cylinder, we have grown our servo motor lineup. Please note when selecting an actuator for ‘Push Motion’ applications, select the stepper motor actuator.

With servo motors, please understand the following conditions which affect the forces and the repeatability of the force:

Max push force setting: (Rated max thrust) x 70%
Push force repeatability:

For more detailed information, please click here to download the PDF

Precaution for Linear Servo Actuator Installation – TIPS-090131

IAI Quality — Tue, 23 Mar 2010 16:42:11 +0000

Subject: Linear Servo Actuator Installation (LSA)

The installation methods of the Linear Servo Actuator (LSA) are limited to the table below.

The models indicated that are unable to be horizontally wall mounted are due to the following reasons:

The sagging and biting of the dust strip by the slider(s) for stroke lengths longer than 400mm.
The linear bearings have not been designed to account for loading in this orientation.

Click Here to download the PDF

Food Grade Grease – TIPS-100030

IAI Quality — Fri, 05 Mar 2010 23:58:47 +0000

Subject: Food Grade Grease

For applications that require food grade grease, Medallion FM grease may be
specified as a special grease. Please note that the actuator itself cannot be
offered as food grade compatible since this requires the actuator to be made out
of stainless steel or be coated in a food grade compatible coating or plating
which we don’t offer as a special option.

Please see the following documents regarding the technical specification and the
material safety data sheet (MSDS).

Click Here to download the PDF

ROBO Cylinder PC Software Version 7

IAI Quality — Mon, 22 Feb 2010 15:00:08 +0000

The new ROBO Cylinder PC Software version 7 is now available.

There are no changes in the functionality of the software for the following controllers: PCON, ACON, SCON, ERC2

The changes for the new ROBO Cylinder PC Software version 7 is the addition of ASEP & PSEP controller functionality.

(1) Free upgrade offer to RC PC software version 7 for:

Customers who already own the RC PC software version 6 and need ASEP/PSEP software. (Software to be sent via email)

Please call our offices and provide the purchase date of your current RC PC Software.

If you require a CD, please contact your distributor with the purchase date and the P.O.# of your current RC PC Software version 6.

(2) Please purchase the new RC PC software version 7 if:

You are a new customer purchasing any ROBO Cylinder with any of the following controllers: PCON, ACON, SCON, ERC2, ASEP/PSEP and do not currently own version 6.
You are customer that owns version 4.

If you have any questions, please contact us at:

IL: 1-800-944-0333

CA: 1-800-736-1712

GA: 1-888-354-9470