This display unit consists of a combination unit having two ROBO Cylinder® slider axes, and a micro-cylinder constituted by a slim small ROBO Cylinder®.
The two slider axes are high acceleration / deceleration models in the RCA series, capable of operating at accelerations / decelerations of up to 1G instead of the normal 0.3G level.
The slim, small ROBO Cylinder® is a micro-cylinder having a very compact size of just 16mm in outer dimension. It can be used to perform positioning operation or push-motion operation in narrow spaces.
These display units are presented to show you a comparison of energy consumption between a ROBO Cylinder® and air cylinder. The results are shown on the touch panel.
The display shows the electricity costs and CO2 emissions while the cylinders are operating.
Electricity bills, CO2 emissions were calculated based on ROBO Cylinder’s power consumption and the measured flow rate of compressed air consumed by the air cylinder. The results are shown on the touch panel.
According to this comparison, ROBO Cylinder’s energy consumption falls to about one-fifth the levels of the air cylinder. You can cut CO2 emissions and running cost by more than 80%.
We can also compare the degrees of vibration of the weights on springs, showing the difference between the levels of impact generating at the end of the stroke on both cylinders.
This display unit is a ROBO Cylinder® + compact electric gripper installed on a small SCARA robot, used to move work parts between the slide table and index table.
This gripper, weighing just 200 g, provides a stroke as long as 8 mm despite its compact body and also produces a high gripping force of up to 14 N.
You can also design the gripping mechanism as you like by selecting a lever type, instead of the slide type as shown here.
For the rotary actuator used for the index table, you can select a desired model from our line up of small, medium and large rotary actuators.
This display unit uses a ROBO Cylinder® combination unit and IA kit to draw text, lines and graphics on the pen tablet.
This IA kit comes with all necessary parts including cable bearers, brackets and can be easily assembled. We can also ship the kit pre-assembled at our factory.
The IA kit is much more affordable and requires a significantly shorter lead time compared to conventional Cartesian robots.
